Goat milk powder spray dryer price for sale
Description
Spray drying process is the widest used in the liquid forming
process and in drying industry. The drying technology is most
suitable for powder, particle products from materials, such
as,solution, emulsion, SC and pumpable paste states material. For
this reason, when the particle size and distribution of the final
product, their residual water contents, the stacking density and
particle shape must meet the precision standard, spray drying
process is one of the most desired processes.
Principle
After filtering and heating, the air enters into air distributor on
top of the Drying Equipment. The hot air enters into the drying
tower spiral form and uniformly. By .passing through high-speed
centrifugal atomizer on top of tower, the material liquid will
rotate and be sprayed into the extremely fine mist liquid beads.
Through the very short time of contacting with heating air, the
material can be dried into final products. The final products will
be discharged continuously from the bottom of drying tower and from
cyclone separator.The waste gas will be discharged from exhaust
fan.
Features
At a high speed of drying, after spraying of the material liquid,
the surface area will be increased greatly. In the hot air flow,
95%-98% of water can be evaporated at a moment. The time of
completing the drying needs only several seconds.
This is especially suitable for drying the heat sensitive
materials. Its final products own good uniformity, mobility,
dissolving capacity. And the final products are high in their
purity and good in their quality.
The production procedures are simple and the operation and control
are easy.The liquid with the moisture contents 40-60% (for special
materials, the contents may reach 90%) can be dried into the powder
of particle products for one time. After drying, there is no need
for crushing and sieving, so as to reduce operation procedures in
the production and to enhance product purity. The product particle
diameters, looseness and water contents can be adjusted through
changing the operation condition in a certain scope. It is very
convenient to carry out control and management.
Technical parameter:
| Item/Model | LPG5 | LPG25 | LPG50 | LPG150 | LPG200-2000 |
| Inlet temperature | 140-350 self-control |
| Outlet temperature | 80-90 |
| Water evaporation (kg/h) | 5 | 25 | 50 | 150 | 200-2000 |
| Centrifugal spray head transmission form | Compressed air transmission | Mechanical transmission |
| Maxi. speed(r.p.m) | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
| Spray disc diameter(mm) | 50 | 120 | 120 | 150 | 180-240 |
| Heat source | electricity | Steam+ electricity | Vapor + electricity, fuel, gas, hot blast stove |
| Electric heating maximum power(kw) | 9 | 36 | 72 | 99 | |
Overall dimensions
(L * W* H) (m) | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | Determined according to the actual situation |
| Powder recovery (%) | ≥95 |
