YC-018 Mini Spray Dryer
YC-018 mini spray dryer is self contained and supplied complete and
ready for immediate operation. All major components are housed
within a stainless steel cabinet and the unit can be used on a
bench top or with an optional stainless steel stand. The system was
designed to be stand by a keyboard, conducted by a colorful crystal
screen of touch guidance mode , and allowed two modes of run:
Automatic-mode, and eye-monitored mode for the purpose of easily
controlling experimental process.
YC-018mini spray applications
YC-018 mini spray dryer can be used in a wide range of applications
where the production of a free-flowing powder sample(10-120μm) is
required. This technique has successfully processed materials in
the following areas:
Beverages • Flavours and Colourings • Milk and Egg Products • Plant
and Vegetable Extracts • Pharmaceuticals • Heat Sensitive Materials
• Plastics • Polymers and Resins • Perfumes • Ceramics and Advanced
Materials •
Soaps and Detergents • Blood • Dyestuffs • Foodstuffs • Adhesives •
Oxides • Textiles • Bones, Teeth and Tooth Amalgam and many others.
Most solutions and suspensions can be spray dried providing that
the resulting product has the characteristics of a solid material.
YC-018 mini spray dryer technique
A menu driven microprocessor controller allows the selection of
inlet temperature, airflow, automatic de-blocker frequency and pump
speed. The controller features an USB output for connection to a PC
or datalogger and software allows the control and monitoring of all
functions and printing of results(optional).
l The self-priming peristaltic pump delivers the sample liquid from
a container through a small diameter jet into the main chamber. At
the same time an integral compressor pumps air into the outer tube
of the jet which causes the liquid to emerge as a fine atomised
spray into the drying chamber.
l Heated air is blown through the main chamber evaporating the
liquid content of the atomised spray. The solid particles of the
material, which are normally in a free flowing state, are then
separated from the exhaust air flow by a cyclone and collected in
the sample collection bottle. The exhaust airflow is directed
through a flexible 60 mm diameter hose direct to atmosphere or to
an existing extraction system.
YC-018 mini spray dryer advantages
l Two modes of run: Automatic-mode, and Eye-monitored mode for the
purpose of easily controlling experimental process . PLC
controller, LCD touch panel control fascia with flow path of
system.
l air oilless compressor , the sound is low than 60db
l Made of SUS-316 Stainless steel. Easy operating.
l To assure accurate temperature control and easy parameter
adjusting, YC-015 applies PID.
l The self-priming peristaltic pump delivers the sample liquid from
a container through a small diameter jet into the main chamber to
avoid secondary pollution.. To make sure the process conducted
steady and smoothly, magnetic agitator is optional to make the
solution well mixed.
l Narrow size distribution of particles.(10-100um)
l Automatic de-blocking device prevents the nozzle from becoming
blocked and variably controlled
YC-018 mini spray dryer techniacl information
| Sr.no | Parameter | YC-018 Spray Dryer |
| 1 | Power | 5500W |
| 2 | Voltage | 220V,50/60 Hz |
| 3 | Atomizer material | SUS 316 Stainless steel |
| 4 | Evaporating Capacity | 4 l/h for water |
| 5 | Airflow | 0-330 mᶟ/h |
| 6 | max. Input temperature | 350⁰C |
| 7 | Heater power | 5000W |
| 8 | Temperature precision | ±1⁰C |
| 9 | Spray gas | 4.2m³/h, 2-5bar |
| 10 | Nozzle jet | 0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available) |
| 11 | Nozzle type | Two fluid nozzle |
| 12 | Possible particle size range | 5-100µm |
| 13 | Mean Residence time | 1.0-1.5 sec |
| 14 | Operation mode | Automatic/Manual |
| 15 | Max. Sample feed | 5000ml/hr |
| 16 | Minimum sample volume | 100ml |
| 17 | Spray chamber material | SUS 304 stainless steel |
| 18 | Cyclone separator material | SUS 304 stainless steel |
| 19 | Receiving tank material | SUS 304 stainless steel |
| 20 | Body material | SUS304 Stainless steel |
| 21 | Seal of cyclone/cylinder | Silicone |
| 22 | Deblocking | Automatic |
| 23 | Sound | <60db |
| 24 | Dimensions | 950*750*1700 |
| 25 | Weight | 150KG |
| 26 | Display | 7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker
frequency |
| 27 | Thermal protection | Blower does not stop until temp <90⁰C |
| 29 | Inert loop (for organic solvents) | Optional |
